Eyelash extension

The Eyelash Extension technique allows to lengthen the eyelashes with the greatest naturalness, duration and flexibility of the hair.

THUYA, a leading brand in professional eye products, offers a complete KIT to perform the service in your center.
Prepare the working area. Place the material to be used on the stretcher. Put the nail polish remover with acetone in a ceramic cup and place the tweezers to be used later.
2. The professional should disinfect the work material with the Hygienic Preparation Solution and put on the mask to maintain maximum hygiene.
3. Remove make-up with special eye make-up remover with the help of a cotton pad and dry with a tissue.
4. Cut two strips of adhesive tape to be able to adhere the protective paper to the skin.

5. Place the Eyelash Extension Paper over the lower eyelid, leaving the lower lashes above the lower eyelid.
6. Place the “X” shaped strips of adhesive tape on the lower eyelashes. The first from the end of the eye to the center and the second from the tear trough to the center.
7. Place a small portion of Eyelash Extensions Glue on the back of a glass Godet.
8. Select a small amount of eyelash extensions from the numbers to be used, and deposit them on the Eyelash Extensions Sponge.
9. With the curved Extension Tongs, pick up the selected extension from the center of the extension.

10. With the straight extension forceps, select a natural eyelash, avoid touching the mobile eyelid with the forceps.
11. Dip half of the eyelash extension into the Eyelash Extension Glue.
12. Place the eyelash extension on the natural eyelash 1 mm from the root and wait for it to adhere slightly.
13. To speed up the drying process, ventilate the extension with the Extension Drying Valve.
Do not over ventilate, it can become annoying.
14. To perform full eye services, apply extensions in sets of 5 per eye.
15. If, on the other hand, only the end is needed, a series of 3 will be applied.
16. Before finishing the service and to check the homogeneity of the application, comb with the Combing Brush or Mask Brush.
17. Once the service is finished, remove the protectors, little by little. And if we observe that they are excessively adhered, remove them with a disc moistened with water-based eye make-up remover.
Remind the client of the maintenance to be followed for its correct durability.